Makita HR2432 Manual Do Utilizador

2

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

USA002-2

Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or
serious personal injury.

Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.

Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.

Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.

Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other.) This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double insula-

tion 

 eliminates the need for the three wire

grounded power cord and grounded power supply
system.

Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock if
your body is grounded.

Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.

Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk of electric
shock.

When operating a power tool outside, use an
outdoor extension cord marked “W-A” or “W”.
These cords are rated for outdoor use and reduce
the risk of electric shock.

Model

HR2432

Capacities

Concrete

Tungsten-carbide tipped bit

25 mm (1”)

Core bit

54 mm (2-1/8”)

Diamond core bit

65 mm (2-1/2”)

Steel

13 mm (1/2”)

Wood

32 mm (1-1/4”)

Dust extraction capacities

Max. drilling depth

100 mm (4”)

(Adjusting depth)

0 - 100 mm (4”)

Max. bit diameter

25 mm (1”)

Max. bit length

270 mm (10-5/8”)

Dust bag capacity

3.7 L

No load speed (RPM)

0 - 1,000/min.

Blows per minute

0 - 4,500

Overall length

407 mm (16”)

Net weight

3.0 kg (6.6 lbs)