D-Link DGS-1224T Manual Do Utilizador
34
STP Function: To selecting enable or disable STP function on the
Switch.
Bridge Priority: This value between 0 and 65535 to specify the
priority for forwarding packets. The lower the value, the higher the
priority. The default is 32768.
Bridge Max Age: This value may be set to ensure that old
information does not endlessly circulate through redundant paths in
the network, preventing the effective propagation of the new
information. Set by the Root Bridge, this value will aid in
determining that the Switch has spanning tree configuration values
consistent with other devices on the bridged LAN. If the value ages
out and a BPDU has still not been received from the Root Bridge,
the Switch will start sending its own BPDU to all other switches for
permission to become the Root Bridge. If it turns out that your
switch has the lowest Bridge Identifier, it will become the Root
Bridge. The user may choose a time between 6 and 40 seconds. The
default value is 20.
Bridge Hello Time: The user may set the time interval between
transmission of configuration messages by the root device, thus
stating that the Switch is still functioning. A time between 1 and 10
seconds may be chosen, with a default setting of 2 seconds.
Bridge Forward Delay: The maximum amount of time (in seconds)
that the root device will wait before changing states. The user may
choose a time between 4 and 30 seconds. The default is 15 seconds.
Port Path Cost: This defines a metric that indicates the relative
cost of forwarding packets to specified port list. The value between
1 and 65535 to determine the cost. The lower the number, the
greater the probability the port will be chosen to forward packets.
The default value is 10.
Switch.
Bridge Priority: This value between 0 and 65535 to specify the
priority for forwarding packets. The lower the value, the higher the
priority. The default is 32768.
Bridge Max Age: This value may be set to ensure that old
information does not endlessly circulate through redundant paths in
the network, preventing the effective propagation of the new
information. Set by the Root Bridge, this value will aid in
determining that the Switch has spanning tree configuration values
consistent with other devices on the bridged LAN. If the value ages
out and a BPDU has still not been received from the Root Bridge,
the Switch will start sending its own BPDU to all other switches for
permission to become the Root Bridge. If it turns out that your
switch has the lowest Bridge Identifier, it will become the Root
Bridge. The user may choose a time between 6 and 40 seconds. The
default value is 20.
Bridge Hello Time: The user may set the time interval between
transmission of configuration messages by the root device, thus
stating that the Switch is still functioning. A time between 1 and 10
seconds may be chosen, with a default setting of 2 seconds.
Bridge Forward Delay: The maximum amount of time (in seconds)
that the root device will wait before changing states. The user may
choose a time between 4 and 30 seconds. The default is 15 seconds.
Port Path Cost: This defines a metric that indicates the relative
cost of forwarding packets to specified port list. The value between
1 and 65535 to determine the cost. The lower the number, the
greater the probability the port will be chosen to forward packets.
The default value is 10.