Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Kenwood
  4. KDC-452U
  5. Manual Do Utilizador

Kenwood KDC-452U Manual Do Utilizador

Download
Página de 44
34
   
|
   
KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U
English
   
|
   
35
General operation
Auxiliary input display setting
You can set the display when switched the AUX 
source. 
1 
Select the AUX source
Press the [SRC] button. 
Select the “AUX” display.
2 
Enter 
the
 Function setting mode
Press and hold the Control knob.
3 
Select the AUX name set item
Select the following items using the Control 
knob. 
“Settings” 
>
 “AUX Name Set”
4 
Select the display connected as an AUX source 
and determine it
Turn the Control knob to select the Auxiliary 
input display, and then press the Control knob.
Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or 
“TV”.
5 
Exit 
the
 Function setting mode
Press and hold the [   ] button.
Function of KDC-X496, KDC-452U, KMR-550U
Muting the audio upon reception of a 
phone call
The audio system automatically mutes when  it 
receives an incoming call.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system 
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system 
comes back ON.
⁄
•  To use the TEL Mute feature, you need to hook up the MUTE 
wire to your telephone using a commercial telephone 
accessory. Refer to 
(page 
12) 
in Quick start guide.
Initial settings
You can configure initial settings of this unit.
1 
Select 
the
 Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 
Enter 
the
 Function setting mode
Press and hold the Control knob.
3 
Select the Initial settings item
Turn the Control knob to select “Initial Settings”, 
and then press the Control knob.
4 
Select a desired Initial setting item
Turn the Control knob to select an Initial setting 
item, and then press the Control knob.
Display
Description
“Initial Settings”
“SRC Select”
Select “2” to change the source selection 
method. Press the [SRC] button, turn the 
Control knob to select the source, and then 
press the Control knob to determine it.
1 / 2 
“Key Beep”
Setting the operation check sound (beep 
sound) ON/OFF.
“ON” / “OFF”
“Function Language” Changes the display language of items 
displayed in the Function setting mode.
“English” / “Français” / “Español”
“Built-in AUX”
Sets whether to display AUX during source 
selection.
“ON” / “OFF”
“CD Read”
Sets the method for reading CD.
When unable to play a special format CD, set 
this setting to “2” to force playing. Note that 
some music CDs may be unplayable even 
when set to “2”.
In addition, audio files cannot be played when 
set to “2”. Normally, keep this set to “1”.
1:  Automatically distinguishes between the 
audio file disc and music CD when playing 
a disc.
2:  Forces playing as a music CD.
“Built-in AMP”
Selecting “OFF” turns off the built-in amplifier. 
Turning off the built-in amplifier improves the 
quality of the sound from Preout.
“ON” / “OFF”
“Speaker Select”
Sets the speaker type so that the System Q 
value is optimal.
“OFF”: OFF
“5/4inch”: For 5 & 4 in. speaker
“6x9/6inch”: For 6 & 6x9 in. speaker
“O.E.M.”: For the OEM speaker
“F/W Update”
Upgrades the firmware.
Selecting “YES” and then pressing the Control 
knob starts upgrading the firmware.
For how to update the firmware, access our 
web site.
http://www.kenwood.com/cs/ce/
(      : Factory setting)
5 
Select an Initial setting and determine it
Turn the Control knob to select desired setting, 
and then press the Control knob.
The previous item is displayed.
6 
Exit 
the
 Function setting mode
Press and hold the [   ] button.