Mercedes Benz 2004 c 240 Manual Do Utilizador

왘

Turn SmartKey in the starter switch to 
position 1 or 2.

왘

Press switch 1 to 4 to the resistance 
point.

The corresponding window will move 
downwards until you release the 
switch.

왘

Pull switch 1 to 4 to the resistance 
point.

The corresponding window will move 
upwards until you release the switch.

왘

Press switch 1 to 4 past the 
resistance point and release.

The corresponding window opens 
completely.

왘

Pull switch 1 to 4 past the 
resistance point and release.

The corresponding window closes 
completely.

왘

Press or pull respective switch again.

G

If you pull and hold the switch up when 
closing the window, and upward movement 
of the window is blocked by some obstruc-
tion including but not limited to arms, hands, 
fingers, etc., the automatic reversal will not 
operate.

!

If the upward movement of the window 
is blocked during the closing 
procedure, the window will stop and 
open slightly.

Remove the obstruction, pull the 
switch again past the resistance point 
and release.

If the window still does not close when 
there is no obstruction, then pull and 
hold the switch again. The side window 
will then close without the obstruction 
sensor function

G

Driver’s door only:
If within five seconds you again pull the 
switch past the resistance point and 
release, the automatic reversal will not 
function.