Mercedes Benz 2006 e 55 amg Manual Do Utilizador
321
Operation
Engine compartment
Checking engine oil level with the con-
trol system
(E 320 CDI, E 500, E 55 AMG)
trol system
(E 320 CDI, E 500, E 55 AMG)
When checking the oil level
앫
the vehicle must be parked on level
ground
ground
앫
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least 5 minutes with
the engine turned off
ture, the vehicle must have been
stationary for at least 5 minutes with
the engine turned off
앫
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the multi-
function display, do the following:
function display, do the following:
왘
Switch on the ignition (
The standard display (
page 153) should
appear in the multifunction display.
왘
Press button
k or j on the mul-
tifunction steering wheel until the fol-
lowing message is seen in the
multifunction display:
lowing message is seen in the
multifunction display:
One of the following messages will
subsequently appear in the multifunc-
tion display:
subsequently appear in the multifunc-
tion display:
앫
Engine oil level
ok
ok
앫
Add 1.0 Qt.
to reach max. oil level
to reach max. oil level
(Canada:
1.0 Liter
)
앫
Add 1.5 Qts.
to reach max. oil level
to reach max. oil level
(Canada:
1.5 Liters
)
앫
Add 2.0 Qts.
to reach max. oil level
to reach max. oil level
(Canada:
2.0 Liters
)
왘
If necessary, add engine oil.
For adding engine oil, see (
For more information on engine oil, see the
“Technical data” section (
“Technical data” section (
Other display messages
If the SmartKey or KEYLESS-GO start/stop
button* is not in position 2, the following
message will appear:
button* is not in position 2, the following
message will appear:
Switch ignition on
to check engine oil level
to check engine oil level
왘
Switch on the ignition (
If you see the message:
Observe waiting period
i
If you want to interrupt the checking
procedure, press button
procedure, press button
k or j
on the multifunction steering wheel.
컄컄