ONKYO TX-SR501E Manual Do Utilizador

13

Connecting Your AV Components—Continued

■ Using Optical or Coaxial Connections

• Use an optical digital audio cable to connect the 

TX-SR501/TX-SR501E’s OPTICAL 1 DIGITAL INPUT 
to the optical output on your DVD player, as shown.

OR

• Use a coaxial digital audio cable to connect the TX-SR501/

TX-SR501E’s COAXIAL DIGITAL INPUT to the coaxial 
output on your DVD player, as shown.

Initially, the OPTICAL 1 digital input is assigned to the DVD 
input source. If you connect your DVD player to a different 
digital input, you’ll need to assign that input to the DVD 
input source (see page 24).

■ Using Analog Connections

Even if your DVD player is connected digitally (coaxial or 
optical), to use 

, or to record audio from your DVD 

player, you’ll need to make analog connections as well.

Use an RCA/phono audio cable to connect the TX-SR501/
TX-SR501E’s FRONT DVD IN connectors to the analog 
audio outputs on your DVD player, as shown.

If your DVD player has L/R outputs and multi-channel 5.1 
outputs, be sure to use the L/R outputs.

■ Using Multi-channel Connections

Use a multi-channel RCA/phono audio cable to connect the 
TX-SR501/TX-SR501E’s L/R FRONT, L/R SURR, CEN-
TER, and SUB WOOFER DVD IN connectors to the 5.1 ana-
log outputs on your DVD player, as shown. 

Alternatively, use three stereo RCA/phono audio cables.

Connect one or the other

FRONT R

FRONT L

SURR L

CENTER

SURR R

SUBWOOFER

FRONT R

FRONT L

SURR L

CENTER

SURR R

SUBWOOFER