ONKYO TX-SR501E Manual Do Utilizador

Configuring Speaker Set A—Continued

With this function you can adjust the volume of each individ-
ual speaker so that you can hear all speakers equally at the
listening position.

Note:
You cannot use this function while the TX-SR501/
TX-SR501E is muted (see page 33).

Note:
If no adjustments are made for two minutes, this function is
cancelled automatically and the previous display reappears.

Adjusting Individual Speaker Volume

Press the remote controller’s
[TEST] button, and turn up the vol-
ume so that you can hear the test
tone sufficiently.

While each speaker outputs the test tone
(pink noise), its name appears on the dis-
play, as shown.

Use the remote controller’s
[CH SEL] button to select each
speaker, and use the LEVEL [ ] [ ]
buttons to adjust the volume.

Speakers are selected in the following
order: Left

→ Center → Right → Surr

Right

→ Surr Back → Surr Left → Sub-

woofer.

You can adjust the volume of each
speaker from –12 dB to +12 dB.

Notes:
• Only speakers that are included in the

• The subwoofer will not output the test

• If you don’t press any buttons for two

seconds, the next speaker is selected
automatically.

CH +

CABLE/SAT

CD/DVD

LEVEL /

CH SEL

TEST

VOLUME /

When you’ve adjusted each
speaker, press the remote control-
ler’s [TEST] button.

The test tone stops and the previous dis-
play reappears.