ONKYO TX-DS494 Manual Do Utilizador

4

Check that the following accessories are supplied with the TX-DS494.

× 1

× 1

(Connector will vary depending on
model specifications)

× 1

(RC-443S for models other
than North American models,
RC-444M for North American
models)

Ω antenna adapter × 1

Declaration  of  Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY

GERMERING, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

A.HORIUCHI

declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding 
technical standards such as EN60065, EN55013, EN55020 and 
EN61000-3-2, -3-3

× 1

(Use this plug if the power cord
plug of the TX-DS494 does not
fit your AC outlet. Shape may
vary depending on the area
which it was purchased.)

The following accessories may be available depending on the area
which it was purchased.

× 2

• 55 Watts minimum of continuous RMS power to each of the

five channels into 8 

Ω from 20 Hz to 20 kHz with no more than

0.08% THD (North American models, FTC rated)

• 75 Watts minimum of continuous RMS power to each of the

five channels into 6 

Ω at 1 kHz (European models, DIN)

• 100 Watts minimum to each of the five channels into 6 

Ω at

1 kHz (Asian models, JEITA)

• Wide Range Amplifier Technology (WRAT)
• Extended Frequency Response (20 Hz to 100 kHz)
• Full bandwidth power to all 5 main channels
• High-current, low-impedance 6-Ohm drive for all five channels
• Oversized electrolytic capacitors
• State-of-the-art linear PCM 96 kHz/24-bit DACs for all channels
• Fully discrete output stages for all five channels
• Optimum Gain Volume Circuitry
• Massive isolated transformer
• 2 Large high-grade extruded-aluminum heat sinks
• A/B speaker drive
• Tone control (bass, treble) for front L/R speakers
• Auto-protection circuitry

• Dolby

∗

 Digital, DTS

∗∗

, Dolby Pro Logic II decoding

• All Channel stereo
• 7 DSP soundfields
• High Definition DSP
• Late night mode (on, off)
• “Easy-set” speaker configuration
• Extensive bass management circuitry
• 5.1-Channel input
• Automatic signal detection
• 3 Assignable digital inputs (2 coaxial, 1 optical)
• 3 S-video inputs and 1 output
• 3 A/V inputs
• 3 Audio inputs
• Phono input
• Dedicated line-level subwoofer pre out
• Full input/output cassette and VCR loops
• 7 Sets of heavy-duty multiway speaker binding posts (dual

banana-plug compatible)

• Outstanding selectivity and sensitivity
• 30 FM/AM random presets
• FM auto tuning
• RDS (European models) with PS
• Red FM stereo indicator
• 75-Ohms antenna input
• FM indoor antenna supplied
• AM loop antenna supplied

• Precision digital speed-sensitive volume control
• Absolute volume display
• Separate PC (printed circuit) boards for audio and video sources
• Large bright fluorescent display
• 2-Mode display dimmer (normal, dim)
• Individual input selectors for each source
• Headphone jack (standard size)
• Audio mute (remote controller)
• Sleep timer (remote controller)
• Battery-free memory backup
• 2 Switched AC convenience outlets with a total 120 watts

max. (100 watts max. for European/Asian models)

• Heavy-duty power cord
• Large non-resonant feet
• Heavy-gauge, anti-resonant, reinforced-steel chassis
• Vibration-resistant cover
• Brushed aluminum front panel
• Powerful preprogrammed remote (North American models)

* Manufactured under license from Dolby Laboratories.

“Dolby”,  “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.

**Manufactured under license from Digital Theater Systems, Inc. US Pat.

No.5,451,942 and other worldwide patents issues and pending. “DTS”
and “DTS Digital Surround” are trademarks of Digital Theater Systems,
Inc. ©1996 Digital Theater Systems, Inc. All rights reserved.