MINOLTA magicolor 2 Manual Do Utilizador
Remove Cables
and Cassette(s)
9-3
Repacking the Printer
Remove Cables and Cassette(s)
»
Note:
If you’re returning the printer for service, you don’t need to
return the power cable, interface cables, or media cassette(s).
1
Turn off the printer.
2
Remove the power cable and all interface cables.
3
Remove the media cassette(s) from the printer.
Remove the Toner Cartridges
1
Open the printer’s front and top covers.
Leave them open during the entire repacking procedure.
2
Remove the four toner cartridges, attach the protective
shields over their magnetic rollers, and repackage them in
their original packaging.
shields over their magnetic rollers, and repackage them in
their original packaging.
Remove the OPC Belt Cartridge
s
Caution:
The OPC belt is extremely sensitive to bright light and direct
sunlight. Limit exposure to 2 minutes. While the printer is being moved,
store the cartridge in its original shipping bag. If you don’t have this
bag, carefully wrap it in a piece of dark, heavy cloth, and place it where
it will not get scratched or damaged. If exposure exceeds 2 minutes,
put the cartridge in a dark place to recover before using it again.
Depending on exposure, recovery may take up to 2 hours.
store the cartridge in its original shipping bag. If you don’t have this
bag, carefully wrap it in a piece of dark, heavy cloth, and place it where
it will not get scratched or damaged. If exposure exceeds 2 minutes,
put the cartridge in a dark place to recover before using it again.
Depending on exposure, recovery may take up to 2 hours.
Also, handle the OPC belt cartridge carefully. The belt’s extremely
sensitive to body oils, moisture, solvents, corrosives, dust, and
scratches, all of which will reduce print quality.
sensitive to body oils, moisture, solvents, corrosives, dust, and
scratches, all of which will reduce print quality.