MINOLTA magicolor 2 Manual Do Utilizador

Cleaning the 

Printer

QMS magicolor 2 Op

eration

5-8

Cleaning the OPC Belt Cartridge

s

Caution: 

The OPC belt is extremely sensitive to touch. Always handle 

the cartridge so you don’t touch the surface of the belt. Any body oil 
left on the surface of the belt will prevent toner from adhering to the 
belt which results in poor image quality. Also, keep the cartridge away 
from anything that may scratch the surface of the belt. Any scratches 
will show in the image produced.

The OPC belt is also extremely sensitive to bright light and direct 
sunlight. Always leave it in its protective bag until you are ready to 
install it. Any exposure to light should be limited to two minutes. If you 
suspect the belt is damaged due to exposure to light, put the belt in a 
dark place to recover. Depending on the amount of exposure, 
recovery may take up to two hours. Recovery time is dependent on 
the amount of exposure sustained. Recovery is not guaranteed.

A dry cotton cloth is required for this procedure.

s

Caution:

 Don’t touch the edge 

of the cleaning blade.

s

Caution:

 Handle the cartridge carefully. The belt is very sensitive 

to hand oils and scratches, both of which reduce print quality.

Cleaning blade

Don’t touch

here.