Mio 336 Manual Do Utilizador

 

7.2  Restoring Factory Default State 

In some cases, you may need to restore your Pocket PC to the factory default 
state by clearing the memory (RAM) from your Pocket PC. For example, you 
should clear the memory: 

 

When your Pocket PC does not respond after being reset. 

 

When you forget your password. 

Clearing the memory means all data you have entered in RAM, including all 
files, system settings and additional programs you have installed, will be erased. 
(Programs installed to ROM at the factory are not affected.) 

 

To ensure the integrity of your data should it be necessary to clear the memory, you’re 

advised to regularly back up your data. (For more information on backing up data, see 
section 3.5.) 

 

Do not slide the battery switch unless it is necessary. 

 

Follow this procedure to clear the memory from your Pocket PC: 

1.  Backup your information if necessary. 

2.  Disconnect all cables, including the AC adapter, from your Pocket PC. 

3.  Stop all running programs by tapping 

   

   

 tab   

 icon   

 tab   

. 

4.  Use the stylus to slide the battery switch to the 

OFF (up) position. 

5.  Wait for 1 minute and then slide the switch back 

to the ON (down) position. 

6.  Your Pocket PC will automatically turn on and 

display the Welcome screen. 

7.  To begin the Welcome Wizard, tap the screen 

with the stylus and follow the onscreen 
instructions to complete the Welcome Wizard. 

 

Wait for 1 minute.