Garmin gpsmap 198c sounder Manual Do Utilizador

Página de 126
GPSMAP 198C Sounder Owner’s Manual 
93
A
PPENDIX
 > 
I
NSTALLING
 
THE
 GPSMAP 198C S
OUNDER
Installing the GPSMAP 198C Sounder
The GPSMAP 198C Sounder must be properly installed according 
to the following instructions to get the best possible performance. 
To complete the installation, you need the appropriate fasteners and 
a 1" x 14-thread marine antenna mount available at most marine 
dealers. 
Mounting the GPS Antenna
The antenna should be mounted in a location that has a clear, 
unobstructed view of the sky in all directions to ensure the best 
reception. Avoid mounting the antenna where it is shaded by the 
boat’s superstructure, a radome antenna, or mast. Sailboat users 
should avoid mounting the antenna high on the mast to prevent 
inaccurate speed readings caused by excessive heeling. Most 
marine VHF and LORAN antennas should not seriously degrade 
the GPS antenna’s reception. Never paint the antenna or clean it 
with harsh solvents.
Suggested locations for mounting the external antenna.
The Garmin antenna screws directly onto any standard 1" x 14-
thread antenna mount. If you need to raise the antenna to avoid 
shading, try using a 1" x 14-thread extension mast available at most 
marine dealers.
  NOTE: It is possible to route 
the coaxial cable either through, 
or outside the antenna mount. It 
is possible to remove the BNC 
connector on the coaxial cable 
and the coaxial cable shortened 
to ease installation, however, 
doing so voids the antenna 
warranty. If the BNC connector 
is removed, it must be replaced 
with a new solder-on or crimp 
BNC connector.