Gary Fisher 2004 gary fisher bicycles Manual Do Utilizador
78
79
CHAPTER THREE
Inspection, Adjustment & Lubrication
Rear suspension allows the rear wheel to move over bumps
with less vertical motion transmitted to the bike or rider. If
your bicycle is equipped with rear suspension, ensure that it
is operating properly before every ride. Read the
Rear Shock
Owner's Manual
you received with your bike. If you did not
receive a shock manual, get one from your dealer, contact us and
we’ll send you one, or download one from an internet site:
www.rockshox.com
www.foxshocks.com
www.foxshocks.com
The following information is only meant to supplement the
shock manufacturer’s manual.
Read the general information in
Suspension pointers- all
systems
as well as the specific information for your type of rear
suspension, covered on the following pages.
Rear suspension pointers- all systems
To get the best performance from your rear suspension
system, maintain its parts well:
• Mainframe
• Swingarm
• Bearings
• Attachment hardware
• Rear shock
• Swingarm
• Bearings
• Attachment hardware
• Rear shock
To work properly, all attachment hardware must be correctly
tightened, and the rear shock must be adjusted to your weight,
your riding style, and the terrain you are riding on.
Keep your suspension components clean. Dirt, mud, and
other contaminants can work into the suspension components,
causing premature wear or excess friction. To clean your
suspension system, use a soft cloth, a brush with soft bristles,
and a solution of soapy water. Rinse with clean water. Do not
use solvents or chemical cleaners, as they can remove the
lubrication from the bearings or rear shock.
Changing your suspension settings will affect handling and
braking characteristics. After making a change, carefully test
the bike in a low traffic area until you are familiar with its
performance.
Lubrication- all systems
No lubrication is required for the shock or the pivot of your
Gary Fisher full suspension bike. Avoid all lubricants as they
may damage the cartridge or composite bearings. For best
results and long life, simply wash the shock and pivot area
with a solution of soap and water, or just water.
Suspension Systems
SUSPENSION SYSTEMS: REAR SHOCKS