Metra Electronics 99-5819 Manual Do Utilizador
99-5819 KIT ASSEMBLY
2
DIN RADIO PROVISION WITH POCKET
Cut and remove the top (2) mounting
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A)
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A)
1
Slide the included brackets onto the
sides of the radio housings pocket
from the back of the housing
forward. (Figure B)
sides of the radio housings pocket
from the back of the housing
forward. (Figure B)
2
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure C)
Housing and secure by bending the
metal locking tabs down. (Figure C)
3
Slide the aftermarket head unit into
the cage and secure. (Figure D)
the cage and secure. (Figure D)
4
Continue to final assembly.
*
Note: Refer also to the instructions included with the aftermarket radio.
CUT HERE -TOP LEG ONLY
CUT HERE -TOP LEG ONLY
CUT
CUT
A
B
C
D