Mitsubishi xd50u Manual Do Utilizador

• Be certain to disconnect the power plug from the power outlet before cleaning.
• Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber

or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the
coatings may peel, etc.

• Wipe with a lint-free, soft, dry cloth.

When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a
chemically-treated cloth is going to be used, please follow any written warnings.

• Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings

may peel, etc.

• When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust.

Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

• Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.

• Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning

paper for eye glasses. Be careful not to scratch the lens at this time.

Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which
could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.

• Switch off the power, check that the

STANDBY indicator has changed to
a steadily lit amber, then unplug the
power cable.

• Clean out the holes from the outside

using a vacuum cleaner. Use the
brush adapter of the vacuum cleaner
to do this. Avoid using the vacuum
directly without attaching the adapter
as well as the use of a nozzle adapter.

Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected
inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact
your dealer.

DV

I

AU

DIO

VID

EO

S-V

ID

EO

ST

ATUS

SOURCE

ST

ANDBY

AUTO

MENU

QUICK

MENU

PC CARD

PC

-C

ARD