Garmin da42-l360 Manual Do Utilizador
Garmin G1000 Cockpit Reference Guide for the DA42-L360
190-01062-01 Rev. A
60
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
mFD & pFD messAge ADvisOries (COnt.)
Message
Comments
MFD1 CONFIG – MFD1 config
error. Config service req’d.
error. Config service req’d.
The MFD configuration settings do not match
backup configuration memory. The G1000
system should be serviced.
backup configuration memory. The G1000
system should be serviced.
SW MISMATCH – GDU software
version mismatch. Xtalk is off.
version mismatch. Xtalk is off.
The MFD and PFDs have different software
versions installed. The G1000 system should be
serviced.
versions installed. The G1000 system should be
serviced.
PFD1 COOLING – PFD1 has poor
cooling. Reducing power usage.
cooling. Reducing power usage.
The PFD and/or MFD is overheating and is
reducing power consumption by dimming the
display. If problem persists, the G1000 system
should be serviced.
reducing power consumption by dimming the
display. If problem persists, the G1000 system
should be serviced.
MFD1 COOLING – MFD1 has poor
cooling. Reducing power usage.
PFD1 KEYSTK – PFD1 [key name]
Key is stuck.
cooling. Reducing power usage.
PFD1 KEYSTK – PFD1 [key name]
Key is stuck.
A key is stuck on the PFD and/or MFD bezel.
Attempt to free the stuck key by pressing it
several times. The G1000 system should be
serviced if the problem persists.
Attempt to free the stuck key by pressing it
several times. The G1000 system should be
serviced if the problem persists.
MFD1 KEYSTK – MFD [key name]
Key is stuck.
CNFG MODULE – PFD1
configuration module is inoperative.
Key is stuck.
CNFG MODULE – PFD1
configuration module is inoperative.
The PFD1 configuration module backup memory
has failed. The G1000 system should be serviced.
has failed. The G1000 system should be serviced.
PFD1 VOLTAGE – PFD1 has low
voltage. Reducing power usage
voltage. Reducing power usage
The PFD1 voltage is low. The G1000 system
should be serviced.
should be serviced.
MFD1 VOLTAGE – MFD1 has low
voltage. Reducing power usage
voltage. Reducing power usage
The MFD voltage is low. The G1000 system
should be serviced.
should be serviced.
DAtAbAse messAge ADvisOries
Message
Comments
MFD1 DB ERR – MFD1 aviation
database error exists.
database error exists.
The MFD and/or PFD detected a failure in
the aviation database. Attempt to reload the
aviation database. If problem persists, the
G1000 system should be serviced.
the aviation database. Attempt to reload the
aviation database. If problem persists, the
G1000 system should be serviced.
PFD1 DB ERR – PFD1 aviation
database error exists.
MFD1 DB ERR – MFD1 basemap
database error exists.
database error exists.
MFD1 DB ERR – MFD1 basemap
database error exists.
The MFD and/or PFD detected a failure in the
basemap database.
basemap database.
PFD1 DB ERR – PFD1 basemap
database error exists.
database error exists.