Microtek gnc m vx2 0506 Manual Do Utilizador

If the functions of the wireless mouse on the Remote Control need to be

operated, please make the following connections to each signal cable according

to the steps numbered 4 ~ 6 below:

4.

Connect the control cable to the Control port of the projector.

5.

Remove the computer mouse cable.

6.

Connect the PS/2 mouse connector of the control cable to the PS/2 port of

the computer.

You may connect your computer to the USB interface of the projector to enable the

function of the wireless mouse on the remote control. Please follow step 7 below for

connection.

7.

Connect one end of the USB Cable to the USB port of the projector, and

connect the other end of the USB Cable to the USB port of your computer.

8.

Tighten all connector screws to ensure secure connections.

9.

For DVI, insert one end of the DVI Cable into the DVI jack of the projector.

Insert the other end of the DVI Cable into the video-out jack on the DVI

source.

Before connecting the projector to a notebook, make sure that both machines

have their power shut off.

ＶＸ２．ｐ６５

02-10-18, 11:02

13