Microtek gnc m vx2 0506 Manual Do Utilizador

producing. The video signal from your company may be out

of the response range of the image source.

Check to ensure whether the video signal source is

connected to the projector.

Check whether this video signal source is outputting a

signal.

If the projector does not receive any video input signal in 30

minutes, the projector will automatically turn the power off.

Try to adjust the focus.

Check to ensure that the distance between the projector and

the screen is within the proper range of distance.

To obtain the best effect, adjust the projector so that the lens

is at right angles to the screen. Additionally, the screen itself

should have a level surface.

Try adjusting the Brightness and the Contrast settings

available on the Computer menu and the Video menu, or you

may also adjust the Synchronization and the Tracking

settings by adding or subtracting the 

 and the

 buttons on the operation panel.

Check the lens for dirt or dust. Use the procedure depicted

on page 40 for details on cleaning the lens.

Abnormal image coloring occurs when the color balance is not set up

properly. You may adjust the color according to the following steps:

If a computer image is being displayed, you may adjust the

RGB settings on the COMPUTER menu.

ＶＸ２．ｐ６５

02-10-18, 11:05

47