ONKYO dv-sp405 Manual Do Utilizador

20

Connecting the DV-SP405—Continued

Switch the player to standby then, using the front panel 
controls, press STANDBY/ON while pressing 

 to 

switch the player back to “Interlace”.
• If the player is connected using HDMI, disconnect the 

HDMI cable before resetting the player to interlace 
output. (If left connected, the HDMI output resolution 
will be reset to its default—see Resetting the output 
resolution to the default setting with HDMI connec-
tion on page 22.)

Note:
• If you connect a TV that is not compatible with a pro-

gressive scan signal and switch the player to progres-
sive, you will not be able to see any picture at 
component out. In this case, switch everything off and 
reconnect using the supplied video cable, then switch 
back to “Interlace”.

This player is compatible with progressive video Macro 
Vision System Copy Guard.
Consumers should note that not all high-definition tele-
vision sets are fully compatible with this product and 
may cause artifacts to be displayed in the picture. In case 
of 525 progressive scan picture problems, it is recom-
mended that the user switch the connection to the “stan-
dard definition” output (Interlace). If there are questions 
regarding our TV set compatibility with this model, 
please contact our customer service center.