ONKYO dv-sp405 Manual Do Utilizador

41

Note:
Onkyo cannot guarantee compatibility (operation and/or 
bus power) with all USB mass storage devices and 
assumes no responsibility for any loss of data that may 
occur when connected to this unit.

It is possible to listen to two-channel audio and watch 
JPEG files using the USB interface on the front of this 
unit. Connect a USB mass storage device as shown 
below.

Notes:
• This includes playback of MP3/WMA/ MPEG-4 

AAC/JPEG files (except files with copy-protection or 
restricted playback).

• Compatible USB devices include portable flash mem-

ory (particularly keydrives) of format FAT16/32. It is 
not possible to connect this unit to a personal com-
puter for USB playback.

• With large amounts of data, it may take longer for the 

system to read the contents of a USB device.

• The Home Menu cannot be displayed while using the 

USB mode.

• Play modes such as “Repeat”, “Random”, “Program”, 

and “Search Mode” cannot be used.

Important:
If a “USB ERR” message lights in the display, it may 
mean that the power requirements of the USB device are 
too high for this player, or that the device is incompati-
ble. Try the following:
• Switch the player off, then on again.
• Reconnecting the USB device with the player 

switched off.

• Change the player back to DVD mode (“LOADING” 

will appear in the front panel display whether a disc is 
inserted or not) by pressing DVD/USB, then once 
again select USB mode (“USB MODE” will appear in 
the front panel display).

• Using a dedicated AC adapter (supplied with the 

device) for USB power.

If this doesn’t remedy the problem, it is likely your USB 
device is incompatible.

With the player switched on, press 
DVD/USB.
Make sure your TV is on and set to the 
correct video input, and that “USB 
MODE” is showing on the front panel 
display.

Connect your USB device.
The USB terminal is located on the front 
panel.
• Disc Navigator is automatically dis-

played.

USB mass storage 
device

tons to select a file that you want 
to play, and press ENTER.
• The method of playback for files saved 

on a USB device is the same as for 
other discs. For more information, see 
“Basic playback controls” on page 28 
and “Playing discs” on page 31.

Turn off this player and remove the 
USB device.
• The next time you turn this player on it 

will start up in USB mode. To return to 
DVD mode, either press DVD/USB or 
press 

 (open/close) to open the disc 

tray.