ONKYO CR-N1 Manual Do Utilizador

48

At the specified ON time, the CR-N1 will 
automatically turn on and play the speci-
fied source. Make sure that the volume is 
set at an appropriate level, and if you’ve 
programmed the timer for CD playback, 
don’t forget to load a disc. At the speci-
fied OFF time, the CR-N1 will automati-
cally turn itself off.

If you configure a day as both a weekday 
and a weekend day, for example, to turn 
the CR-N1 on and off twice on that day, 
leave at least one minute between the 
first timer’s OFF setting and the second 
timer’s ON setting. If the second timer’s 
ON setting occurs before the first timer’s 
OFF setting, the second timer’s settings 
will be ignored.

If the sleep timer function is turned on 
during a timer’s ON–OFF period, the 

CR-N1 will automatically enter Standby 
mode after the specified sleep time has 
elapsed, ignoring the timer’s OFF setting.

The timer still works when the Energy 
Save function is on.

The timers can be turned on and off inde-
pendently as follows.

Note that a timer cannot be turned on unless 
it has been programmed.

When the Weekday timer is on, “W.DAY” 
is displayed, and when the Weekend 
timer is on, “W.END” is displayed.

MHz

TIMER
W.DAY

or

TIMER
W.DAY