Cadillac srx Manual Do Utilizador
Flash-to-Pass
This feature allows you to use the high-beam headlamps
to signal the driver in front of you that you want to pass.
to signal the driver in front of you that you want to pass.
Pull and hold the turn signal/multifunction lever toward
you to use this feature. When this is done the following
will occur:
you to use this feature. When this is done the following
will occur:
•
If the headlamps are off, in low-beam or in Daytime
Running Lamps (DRL) mode, the high-beam
headlamps will turn on. They will stay on as long as
the lever is held there. Release the lever to turn
them off.
Running Lamps (DRL) mode, the high-beam
headlamps will turn on. They will stay on as long as
the lever is held there. Release the lever to turn
them off.
•
If the headlamps are in high-beam mode, they will
switch to low beam. To return to high-beam, push
the lever forward.
switch to low beam. To return to high-beam, push
the lever forward.
Windshield Wipers
The lever on the right side of the steering column
operates the windshield wipers.
operates the windshield wipers.
Move the lever to one of the following positions:
7
(Mist): Pull the lever down and release it for a
single wiping cycle. The lever will return to its original
position. Hold the lever in this position for continuous
wiping cycles.
position. Hold the lever in this position for continuous
wiping cycles.
9
(Off): Turns off the wipers.
&
(Delay): For a delayed wiping cycle. Turn the delay
adjustment band to set the length of the delay.
3-9