Oricom bb200 Manual Do Utilizador

 

 

- 7 - 

 

 

 
Introduction 
 
When the phone is in standby mode, the LCD displays the handset name.  The battery 
icon reflects the current battery level and the signal icon indicates the handset is linked 
to the base.   

 

•

  When you receive a call, both handset and base will ring, the 

 symbol appears on 

the display, and both the red led on the handset locator button and the big red led on 
the phone base will start flashing.  If your cordless is directly connected to the 
telephone line (not via PABX) and the Caller Details Service has been activated by 
your server, the caller’s telephone number (if available) appears on the display. 

•

  Press the   button to answer the call, the symbol 

 will come up steadily on the 

display and the base red led with flash. 

•

  To end a call, press again the    button, or alternatively replace the handset back in 

the base.  The display symbol and the base red led disappear. 

 
MAKING A CALL  

•

  Press    button. 

•

  The symbol 

 appears steadily on the display and the base red led starts flashing. 

•

  Check that the dial tone is present then key in the number. 

•

  The dialled number appears on the display. 

•

  To end the call, press again the    button or alternatively replace the handset back 

in the base. 

 
USING THE HANDS-FREE SPEAKERPHONE 
 
The Hands-free function provides the convenience of talking to the caller without 
holding onto the phone and allows others in the room to be involved in the 
conversation. 
To activate the speakerphone, press the X button when the handset is in standby 
mode or after having pressed the   button to make or pick up a call. 
The speakerphone is active if you can hear the callers voice coming from the speaker 
and can see the X and the 

 symbols on the display 

 (hold repeatedly the Volume 

button to adjust the speaker volume).  To switch back to normal mode from a 
speakerphone call, briefly press the X button.