ONKYO dv-cp702 Manual Do Utilizador

17

Connecting the DV-CP702—Continued

This section explains how to connect the DV-CP702 to your 
TV or projector. 

In this hookup example, the TV handles the audio and video. 
If your TV has a Dolby Pro Logic decoder built-in, you’ll be 
able to enjoy DVDs and videos that bear the Dolby Surround 
logo.

To enjoy Dolby Digital or DTS (5.1-channel surround), 
you’ll need a compatible decoder (see page 18).

The DV-CP702 has three types of video output: component 
video, S-Video, and composite video. Component video 
offers the best picture quality, so if your TV supports it, use 
a commercially available component video cable to connect 
the DV-CP702’s COMPONENT video output to the compo-
nent video inputs on your TV. If your TV supports progres-
sive scanning, you must use component video in order to take 
advantage of that feature.

S-Video offers better picture quality than composite video, 
so if your TV supports it, use the supplied S-Video cable to 
connect the DV-CP702’s S VIDEO output to an S-Video 
input on your TV. Failing that, use the supplied composite 
video cable to connect the DV-CP702’s VIDEO output to a 
composite video input on your TV.

• Before making any connections, turn off the DV-CP702 

and your TV and disconnect their power cords from the 
wall outlets.

• Also refer to the connection information supplied with 

your TV.

• Connect the DV-CP702’s video outputs directly to your 

TV. Don’t connect a VCR or other video equipment in 
between your DV-CP702 and TV. Doing so may result in 

picture distortion, because of the copy protection system 
used on DVD-Video discs.

• When you use the analog audio outputs, don’t play DTS 

CDs or don’t select DTS soundtracks on DVD-Video discs. 
Doing so will produce unpleasant digital noise, which may 
damage your equipment.

(yellow)

(yellow)

(white)

(white)

(red)

(red)