Garmin 20 Manual Do Utilizador

➌

Select the adapter cable that fits your phone. 

Additional adapter cables are available at  

http://my.garmin.com/shop. 
Connect the adapter cable to the power connector 

on your phone and connect the other end of the 

adapter cable into the power connector on the 

bottom of the phone mount. This charges your 

phone while it is in the mount. 
Gently pull the slide bars away from the mount. 
Slide your phone into the mount. 
Adjust the posts for the best fit. 

Note: Some phones will not charge outside of a specific 

temperature range. If your phone does not charge, refer 

to the phone’s documentation for more information.
To remove your phone from the mount, disconnect the 

cable, turn the phone sideways, and remove the phone.

➍

Plug the GPS 20SM into an available power receptacle 

in your vehicle; the GPS 20SM automatically turns on. 

1.

2.

3.
4.
5.

➎

Bluetooth

®

 wireless technology establishes a wireless 

link between your mobile phone and the GPS 20SM. 

See www.garmin.com/mobilephones to verify that your 

mobile phone is compatible with the GPS 20SM.
The wireless connection between your phone and the 

Bluetooth GPS is created automatically. To use the 

hands-free features of the GPS 20SM, you must “pair” 

the two devices to establish a wireless connection. 

Close the Garmin Mobile XT application.
Make sure your mobile phone and GPS 20SM are 

turned on and within 10 meters of each other. 
Enable your mobile phone’s Bluetooth component. 

This might be in a menu called Settings, Bluetooth, 

Connections, or Hands-free. 
Initiate a search for Bluetooth devices. 
Select the 

GPS 20SM from the list of devices. 

Enter the GPS 20SM’s Bluetooth PIN (

1234) into 

your mobile phone.

For more specific instructions on pairing your phone, 

refer to your phone’s documentation.

1.
2.

3.

4.
5.
6.