Hitachi 42pd9r10 Manual Do Utilizador

ENGLISH

FUNCTION (continued)

Multi Picture Mode (continued)

2-picture mode (continued)

4. To switch to 4-picture mode, press

2-4-12

button once.

The 4-picture mode is displayed on the screen.

NOTE

Each time

2-4-12

button is pressed, the picture mode will be switched by following order.

2-Picture

2-Picture (1080i)*

4-Picture

12-Picture (TV mode only)

* When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))

which sub-screen is displayed inside of the large screen (Main-screen). Please
note that you cannot display the picture with component signal on Sub-screen.

5. To EXIT from the Multi Picture mode, press

button.

Next time you press

button to activate the Multi Picture mode, it will start from 2-picture mode.

4-picture mode

You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.

NOTE

The audio comes out ONLY from side A.
You can change the channels or change Input modes on the side with ▼ (red triangle) mark.

1. To switch the ▼ location

Press

buttons on the remote control.

The ▼ mark will shift to side A and side B back-and -forth.

2. To change the channel

Make sure that ▼mark is located on the side you want to make changes.

Side A: Press

button to select channels.

Side B: Select the frame (B1~B3) that you want to make changes

with

button. The characters of selected frame will be highlighted in green.

Press

button to select channels.

3. To change Input mode

Make sure that ▼mark is located on the side you want to make changes.

Side A: Press Input Select buttons on the remote control.
Side B: Select the frame (B1~B3) that you want to make changes

with

buttons. The characters of selected frame will be highlighted in green.

Press Input Select buttons on the remote control.

B1 8

B2 6

B3 11

The selected picture with red triangle mark

AV2

AV1

(Sub-
screen)

[2-Picture (1080i) Mode]