Grizzly g8720 Manual Do Utilizador

MODEL G8720

⁄

TON

HIGH LIFTING JACK

INSTRUCTIONS

WARNING: NO pORTION OF THIS MANUAL MAy bE REpRODUCED IN ANy SHApE

OR FORM WITHOUT THE WRITTEN AppROvAL OF GRIzzLy INDUSTRIAL, INC.

#ts11148 printEd in China

To reduce the risk of serious injury when

using this jack:

1. Only use this jack for lifting and do not

exceed the design specifications.

2. DO NOT alter any part of this jack

or use it for any purpose it was not

designed for.

3. DO NOT lift vehicles with curved or

tubular bumpers that will slip off the

lifting nose. Always position the lifting

nose under a flat, stable part of the

vehicle that will safely handle the load.

4. Always stabilize and chock the load

before positioning the jack underneath

it.

5. Make sure the base of the jack is on a

flat, solid surface that can hold the load

and that will not allow the jack base to

slip.

6. NEvER place any part of your body

under a load lifted by this jack.

7. DO NOT push the load off the jack.

Lower the load slowly and carefully and

make sure all bystanders are clear of

the load.

8. DO NOT use extension devices on the

jack handle.

Specifications

Max. lifting load ......... 3

⁄

u.s. tons (7000 lbs.)

required Minimum lifting load .............. 110 lbs.
Maximum lifting height ..................................48"

Overview

the Model g8720 3-1/2 ton high lifting Jack
is designed to lift a load higher than the typical
automobile jack. the lifting assembly "walks" the
lifting nose along the jack bar using two climbing
pins that move in and out of the holes on the bar
as the jack handle is raised and lowered.

Figure 1. Model g8720 identification.

Jack handle

Jack Base

Jack Bar

lifting nose
& assembly

top

Connecting

plate