Harbor Freight Tools 66187 Manual Do Utilizador

3491 Mission Oaks Blvd., Camarillo, CA 93011 

Copyright

©

 2008 by Harbor Freight Tools

®

.  All 

rights reserved.  No portion of this document or any 

artwork contained herein may be reproduced in any 

shape or form without the express written consent of 

Harbor Freight Tools.  Diagrams within this document 

may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the 

product described herein.  Tools required for installation 

and service may not be included.

Weight Capacity

250 lb.

Arm Width

19”-34”

Rack Height

53”

When unpacking, make sure that the item is 

intact and undamaged.  If any parts are missing or 

broken, please call Harbor Freight Tools at  

1-800-444-3353 as soon as possible.

Follow DOT regulations regarding installation 

1. 

and use.
Verify that installation surface has no hidden 

2. 

utility lines before drilling or driving screws.
Install only according to these instructions.  

3. 

Improper installation can create hazards.
Wear ANSI-approved safety goggles and 

4. 

heavy-duty work gloves during installation.
Keep installation area clean and well lit.

5. 

Keep bystanders out of the area during 

6. 

installation.
Do not install when tired or when under the 

7. 

influence of drugs or medication.

Do not exceed 250 lb. weight capacity, 

1. 

distributed evenly across both Frames. Be 

aware of dynamic loading!  Sudden load 

movement may briefly create excess load 

causing product failure.
Strap ladder securely to rack.

2. 

When expanding the Arm (6), leave at least 

3. 

2.5” of the tube in the Frame (1).
Use as intended only.

4. 

Inspect before every use; do not use if parts 

5. 

loose or damaged.
Maintain product labels and nameplates.  

6. 

These carry important safety information.  

If unreadable or missing, contact Harbor 

Freight Tools for a replacement.