Hitachi 42pd7500a Manual Do Utilizador

Vertical picture position can be adjusted for [Panoramic], [Zoom] , [C14:9L] and [14:9Zoom] mode as follows.
1. Press SIZE button and 

button during picture size display.

2. Position display will appear.
3. Adjustment range of each picture size are as shown below. 

[Panoramic]

- 12 to + 12

[Zoom]

- 31 to + 31

[C14:9L] and [14:9Zoom]

- 16 to + 16

4. When 1080i/60 component signal is received, vertical position can be adjusted only one step up. (The range: 0 to +1)

Press

Press

• This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV

programme, the image would appear different from the original. Take this into consideration when making screen mode choices.

• Use of this monitor in its enlarged display mode with the wide feature enabled in coffee shops, hotels and other establishments for

commercial or pubic viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.

• When a normal 4:3 image is displayed over the entire screen in the Panoramic mode, parts of the periphery of the image may disappear

and/or appear distorted in some cases. Use the 4:3 mode to view images, which were created in 4:3 mode.

This mode allows 4:3 content to be viewed without picture distortion.

* Real mode gives the image of the same shape as it is displayed on a computer monitor.

This mode is only available for VGA (640 X 480) and WVGA (864 X 480).

The size for WXGA (1366 X 768) will be fixed as Full mode.

 Normal        Full        Zoom1

 Real        Zoom3        Zoom2

*

Resolution

Full display

Circular display

Full

Normal

Real

* VGA and 

W-VGA only

Zoom1

Zoom2

Zoom3

Display

640 X 480

(VGA)

800 X 600

(SVGA)

1024 X 768 

(XGA)

1280 X 1024

(SXGA)

1600 X 1200

(UXGA)

Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this, there is a possibility that
flicker may become noticeable on Zoom (1 ~ 3) depending on the display contents. If this occurs, turning the Vertical Filter On           can
reduce the flicker.

When you want to

Set the display size to

Input signal

Display screen

Remarks

Play a 14:9 image in a 16:9 screen
expanded vertically and squeezed hori-
zontally.

C14 : 9L

This mode is provided for the broadcasting
programme with WSS code-C14:9L.

Play a 14:9 image expanded vertically on
the 16:9 screen.

14 : 9Zoom

This mode is provided for the broadcasting
programme with WSS code-14:9Zoom.

(14:9 signal)

(14:9 signal)