Hitachi 42pd7500a Manual Do Utilizador

Select the country name by 

and

button and press OK button.

• If some required stations could not be preset in this auto tuning

function, select and preset the required station in the required
position by the manual tuning operation.

Press the OK button and it starts the auto tuning.

This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by 

and 

button and move to next digit by 

button. Press the OK button

again after finished.
• Selectable letters are “0”~”9”, ”A”~”Z”, “+”, “–”, ” ”(blank),

”,”(comma) and ”.”(period) .

Select the sound system through the 5 different settings.

Select the colour system through the 5 different settings.

If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.

If this is set to On, that position will be skipped whilst selecting posi-
tions by CHANNEL UP/DOWN button.
This is automatically set to On for those non-broadcasting channels.

After completing the fine-tuning, press the RETURN button to exit
this mode.
• The variable range is -56 ~ +56.

Select the teletext language, depending on the area utilized through
the 4 settings: West Europe, East Europe, Cyrillic, and Greek/Turkish.

If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.

Press OK button at the line that is required to change order, then the
characters will change to green. And move it up or down in the list
by pressing 

and 

button. And press OK button to complete it.

Press the RETURN button to exit.

Set the position number(1~199 and AV00) or channel number by (+)
(–) CHANNEL UP/DOWN button.

Auto Tuning

Search

Manual Tuning

Position

Name

Sound System

Colour System

Skip

At first, select the channel entry method, entering a two digit chan-
nel number(CH), entering a two digit S-band number or entering a
three digit frequency(MHz), by pressing the OK button.

Search

Set this to Off normally. If it is set to On when selecting other than
DTT in Scart Output, AV1 (Scart) terminal operates as TV signal
output, and the screen changes to display AV1 (Scart) input signal
automatically.

Descrambler

NR

Fine Tuning

Sort

Increasing the frequency data
for the main tuner.

Decreasing the frequency
data for the main tuner 

–

–

–

–

–

–

–

–

–

–

–

–

(A Line of position List)

Teletext Language

Auto Off

Country

(Page1)          (Page2)          (Page3)

(   :a letter)

L         L'         BG

DK          I

Auto         PAL         SECAM

NTSC3.58         NTSC4.43

Off          On

Off          On

Off          On

Enter two digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.

Enter two digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.

(C--)

(S--)

–

–

Enter three digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.

(--MHz)

1          2          3

••••••

199         AV00

Off          On

DTT : AV1 (Scart) output will be fixed as DTT signal output.
TV : AV1 (Scart) output will be fixed as TV signal output.
Monitor : AV1 (Scart) output can view the image as on the main unit.
But it is possible to monitor only the composite video signal from
AV2, AV3, or AV4 input that is displayed on the screen at the time.
• If Descrambler is set to On when selecting other than DTT, it will

be fixed as TV automatically.

DTT          TV         Monitor

Scart Output