Hitachi p42t501a Manual Do Utilizador

This optional feature allows the user of the remote
control to setup it’s 

SOURCE SELECT

 button to access

the specified input of the TV.  Setup for this feature is
applicable to the remote control’s normal mode only and

only applies to the DVD, PVR

/VCR and SAT/CBL

modes.

1.

Select the desired device mode (DVD, 

PVR/VCR,

SAT/CBL

) by using your SOURCE

SELECT button

to position the LED indicator to the corresponding

selection.

2. Hold down the 

SOURCE SELECT 

button 

on the

remote

and enter the four digit preset code that

matches your device as shown on pages 37-38.

3.

Then enter the assigned input number (1-

7

) that the

device is related to

 (refer below to Table 1)

.

4.

Release 

the SOURCE SELECT

 button.

5.

If done correctly, the device LED indicator will 

blink

3 times to confirm proper setup.

6.

The remote will now control the desired device.

7. Pressing the 

INPUTS button 

will now

 access the

video input of the desired device.

Select DVD mode by using your SOURCE 

SELECT

button to position the LED indicator to

 DVD.

Hold down the 

SOURCE SELECT

 button and

press the 

numbers 0, 5, 7 and 3.

Then press the number 1 for the assigned input

number of the DVD player.

Release 

SOURCE SELECT

button.

If done correctly, the device LED indicator will 

blink

3 times to confirm proper setup.

The remote will now control the DVD player.

Press the 

INPUTS

button to instantly

 access the

video input of your DVD on Input 1.

SOURCE SELECT Button

36

HDMI- FRONT                             7

ASSIGNMENT NUMBER

INPUT

Table 1

, , 

HDMI 2                                         6

HDMI 1                                         5

INPUT-

 FRONT                           4

INPUT 3                                       3

INPUT 2                                       2

INPUT 1                                       1

,

,