Human Touch wholebody Manual Do Utilizador

REMOVING THE CALF MASSAGER MOTOR

1. Partially recline the chair (Fig.1).

2. Power off the chair, then unplug it.

3. Pull up on the calf massager rotation release handle, then rotate the calf massager until the flat side is facing upward (Fig.2).

4. Using a paper clip, open the calf massager zipper (Fig.3).

5. Using a Phillips-head screwdriver, remove the four screws that secure the calf massager cover (Fig.4).

Tools Required: Phillips-head screwdriver, paper clip, wire cutters or other instrument suitable for cutting zip-ties, new zip-ties

NOTE: SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY

REPLACING CALF MASSAGER MOTOR

Oct 10, 2012

It is imperative that Human Touch

products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used

during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair
instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.

SERVICE LEVEL: 2

WholeBody

2.0

(Fig.1)

(Fig.2)

(Fig.3)

(Fig.4)

Release handle

Zipper