Konica Minolta dimage xt Manual Do Utilizador

18

INSTALLING AND REMOVING A MEMORY CARD

An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.
If a card has not been inserted, a no-card warning will appear on the LCD monitor; the shutter can
still be released and a single image can be captured (p. 55).

Always turn off the camera and confirm the indicator lamp is not orange

and blinking before changing the memory card, otherwise the card may be

damaged, and data lost.

Slide the battery-chamber door toward the bottom of the cam-
era to release the safety catch (1). Open the door.

Insert the memory card all the way into the card slot and then
release (2). The card should catch in the slot.

Insert the card so the face is toward the front of the camera.
Always push the card in straight, never at an angle. Never
force the card. If the card does not fit, check that it is orientat-
ed correctly. If a MultiMediaCard is inserted incorrectly, it will
lock, but the card chamber door will not close.

To eject a memory card, press the card into the slot and
release (3). The card can now be pulled out.

Close the battery-chamber door and slide it toward the top of
the camera to engage the safety catch (4).