ONKYO dv-sp403e Manual Do Utilizador

21

Although you can reproduce the DVD Player’s sound 
from the TV speakers with the connections on page 18, 
connecting with an amplifier provides you high quality 
dynamic sounds.
To reproduce Dolby Digital surround and DTS surround 
sound, you need to connect to an amplifier with a Dolby 
Digital and DTS decoder respectively.

Before connecting
• When you connect the DVD Player to the amplifier, be 

sure to turn off the power and unplug both units from 
the mains before making any connections. Otherwise, 
the speakers may be damaged.

• Connect the plugs securely.

To enjoy surround sound you need to connect this player 
to an AV receiver using a digital output. This player has 
coaxial digital jack.
In addition to a digital connection, we recommend also 
connecting using the stereo analog connection.
To record the audio from a CD-R disc etc. to a cassette 
or CDR recorder that’s connected to the AV receiver, and 
when your AV receiver has Zone2, you must connect the 
DV-SP403E’s analog audio outputs to the AV receiver.
You’ll probably also want to connect a video output to 
your AV receiver. You can use any of the video outputs 
available on this player (the illustration shows a standard 
(composite) connection).

This enables you to listen to surround sound.
For a coaxial connection, use a coaxial cable (similar to 
the supplied video cable) to connect the “COAXIAL 
DIGITAL AUDIO OUT” jack to a coaxial input on your 
AV receiver.

The diagram shows standard video connections, but you 
can alternatively use the S-Video or component video 
connections if they’re available.

Tip:
• You usually have to connect the same kind of video 

cable between your DVD player and AV receiver, and 
between your AV receiver and TV.

AV receiver

AV receiver