ONKYO HTP-240 Manual Do Utilizador

 

7

 

■

 

To mount the center speaker horizontally, use the two 
keyhole slots shown below to hang it on two screws that 
are securely screwed into the wall.

 

A mounting screw’s ability to support a speaker depends 
on how well it’s anchored to the wall. If you have hollow 
walls, screw each mounting screw into a stud. If there are 
no studs, or the walls are solid, use suitable wall anchors.
Use screws with a head diameter of 3/8 inch (9.5 mm) or 
less and a shank diameter of 1/8 inch (or 4 mm) or less 
(No. 8 or smaller). With hollow walls, use a cable/pipe 
detector to check for any power cables or water pipes 
before making any holes.
Leave a gap of between 9/32"(7 mm) and 13/32" 
(10 mm) between the wall and the base of the screw 
head, as shown.

(We recommend that you consult a home installation 
professional.)

Threaded inserts for M5 machine screws (1/4-inch 
screws for North American model) are provided on the 
rear of each speaker for wall-mounting with commer-
cially available speaker mounts and brackets. Refer to 
the manual supplied with your mounts or brackets for 
installation details.

 

The portion of the screw that goes into the speaker’s 
threaded insert should be between 1/5" and 3/8" of an 
inch long (5 mm and 9 mm).

4-7/8" (125 mm)

7-9/16" (190 mm)

4-7/8" (125 mm)

2-9/16"
(65 mm)

2-9/16"
(65 mm)

Keyhole slots for horizontal 
wall mounting

Spacers

Spacers

9/32"–13/32"

(7 – 10 mm)

Wall

Use this hole if mounting 
vertically

Use this hole if mounting 
horizontally

1/4" (North American)
5 mm (Others)

1/5"–3/8"

(5 – 9 mm)

Mount or bracket

HTP-240.fm Page 7 Thursday, April 7, 2005 4:36 PM