ONKYO dv-sp504e Manual Do Utilizador

 

48

 

With this setting you can select the video format to be 
used for the SCART AV CONNECTOR: RGB, S-Video, 
or composite video. Before changing this setting, refer to 
your TV’s manual to see if its SCART input can accept 
video signals in these formats.

 

Composite video offers stan-

dard quality.

 

S-Video offers the next best picture quality.

 

This format offers the best picture quality.

 

• If you select a format that is not supported by your TV, 

the setup menu may disappear from the screen. If this 
happens, switch off your equipment, connect the DVD 
player to your TV with a composite video or S-Video 
cable, and then change this setting.

• When RGB is selected, nothing is output by the com-

ponent video output and HDMI output.

 

With this setting you can configure the optical, coaxial, 
and HDMI digital outputs.

 

Dolby Digital and DTS signals are out-

put as they are.

 

Dolby Digital and DTS signals are down 

mixed to 2 channels and output as PCM.

 

No digital signals are output.

 

• MPEG is output as PCM regardless of this setting.

 

With this setting you can configure the DVD player to 
output digital audio with higher sampling rates (e.g., 
88.2 kHz, 96 kHz) as it is or to down sample it to 48 kHz 
or below.
If the AV component you connect to the DVD player’s 
digital audio outputs supports 96 kHz digital audio, 
select Down Sample Off. Otherwise, select Down Sam-
ple On.

 

196 kHz and 96 kHz sources are 

down sampled to 48 kHz, and 176.4 kHz and 
88.2 kHz sources are down sampled to 44.1 kHz.

 

Sources are output as 

they are.

 

• Some copy-protected DVD-Video discs may use 

96 kHz digital audio only for D/A conversion to the 
analog audio outputs.

• With some discs, even if you select Down Sample Off, 

the digital audio will be down sampled, and in some 
cases may not be output by the DVD player’s digital 
audio outputs.

 

With these settings, you can specify which speakers are 
connected and their sizes. These settings only apply to 
the DVD player’s analog multichannel output. If you 
connect to only the FRONT/D.MIX L/R jacks, set the 
Subwoofer, Center Speaker, and Surround Speaker set-
tings to Off.

 

• The Speaker Configurations have no effect on 

192 kHz/176.4 kHz DVD-Audio.

• To use the Speaker Configuration settings with SACD 

playback, in the SACD Audio Setup, select PCM.

 

■

 

Select if a subwoofer is connected.

 

Select if no subwoofer is connected.

 

■

 

Select if the front speakers are large.

 

Select if the front speakers are 

small.

 

• If the Subwoofer setting is set to Off, this setting is 

fixed at Large and cannot be changed.

 

■

 

Select if the center speaker is large.

 

Select if the center speaker is small.

 

Select if no center speaker is connected.

 

• If the Front Speaker setting is set to Small, the 

Large option cannot be selected.

• The Center Speaker and Surround Speaker settings 

can only be set to the same size.

 

■

 

Select if the surround speakers are large.

 

Select if the surround speakers are 

small.

 

Select if no surround speakers are connected.

 

• If the Front Speaker setting is set to Small, the 

Large option cannot be selected.

• The Center Speaker and Surround Speaker settings 

can only be set to the same size.

DV-SP504E_En.book Page 48 Wednesday, August 30, 2006 1:55 PM