GE profile spbd880jmg Manual Do Utilizador
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Special Installation Requirements:
Stacked Installation:
Kit for stacking dryer over washer is not included with the washer.
Order GEFLSTACK.
Alcove or Closet Installation:
• If your dryer is approved for installation in an alcove or closet, it will be
Stacked Installation:
Kit for stacking dryer over washer is not included with the washer.
Order GEFLSTACK.
Alcove or Closet Installation:
• If your dryer is approved for installation in an alcove or closet, it will be
stated on a label on the dryer back.
• The dryer MUST be exhausted to the outside.
• Minimum clearances between dryer cabinet and adjacent walls or other
• Minimum clearances between dryer cabinet and adjacent walls or other
surfaces are: 0" either side, 3" front and rear
• Minimum vertical space from floor to overhead cabinets, ceilings, etc. is 52".
• Closet doors must be louvered or otherwise ventilated and must contain a
• Closet doors must be louvered or otherwise ventilated and must contain a
minimum of 60 sq. in. of open area equally distributed. If this closet contains
both a washer and a dryer, doors must contain a minimum of 120 sq. in. of
open area equally distributed.
both a washer and a dryer, doors must contain a minimum of 120 sq. in. of
open area equally distributed.
• No other fuel-burning appliance shall be installed in the same closet with
a gas dryer.
Bathroom or Bedroom Installation:
• The dryer MUST be exhausted to the outdoors.
• The installation must conform with the local codes, or in the absence of
• The dryer MUST be exhausted to the outdoors.
• The installation must conform with the local codes, or in the absence of
local codes, with the National Fuel Gas Code, ANSI Z223.
Minimum Clearance other than Alcove or Closet Installations:
• Minimum clearances to combustible surfaces 0" both sides, 3" rear.
For more information on venting kits and accessories,
• Minimum clearances to combustible surfaces 0" both sides, 3" rear.
For more information on venting kits and accessories,
please call 1-800-GE-CARES.
Stacked Dimensions (in inches)
79 1/2"
27
15
29-1/2
SmartDispense
™
Pedestal
Dimensions (in inches)
SPBD880JMG - Champagne
SPBD880JMG - Champagne
SPBD880JWW - White
This optional 15" pedestal raises
the door opening and height of
the washer or dryer. Feet on
15" pedestal allow it to adjust to
15-3/8" height.
This optional 15" pedestal raises
the door opening and height of
the washer or dryer. Feet on
15" pedestal allow it to adjust to
15-3/8" height.
15"
29-1/2"
27"
Storage Pedestal Dimensions
(in inches)
SPSD157JMG - Champagne
SPSD157JMG - Champagne
SPSD157JWW - White
This optional 15" pedestal raises
the door opening and height of
the washer or dryer. Feet on
15" pedestal allow it to adjust to
15-3/8" height.
This optional 15" pedestal raises
the door opening and height of
the washer or dryer. Feet on
15" pedestal allow it to adjust to
15-3/8" height.
Specification Revised 10/10
260193
PFWS4600L/PFWS4605L
GE Profile 5.1 IEC* cu. ft. stainless steel capacity frontload washer with Steam