OKI office 87 Manual Do Utilizador
72
OKIOFFICE 87 User’s Guide
Changing Your User Function Settings
FUNCTION NO.[_ ]
ENTER 01-34
ENTER 01-34
+
+
SELECT
FUNCTION
USER
PROG.
9/SPACE
YES
1
Press the SELECT FUNCTION key.
2
Press the 9/USER PROG. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
1:FUNC. PROGRAMMING.
3
Press
YES
. The display shows FUNCTION NO. [ ].
4
Using the numeric keypad, enter the 2-digit number of the function
you want to change. This display shows the name of the selected
function.
you want to change. This display shows the name of the selected
function.
5
Repeatedly press
NO
until the setting you want appears in the
display.
Tip:
If you are changing your MFP machine’s TX MODE DEFAULT
settings, the new settings appears on the LEDs above the Transmit
Resolution/
Resolution/
YES
and the Type of Original/
NO
6
Press
YES
to confirm your selection. The name of the next
function setting appears in the display.
7
Press the SELECT FUNCTION key to finish.
Setting Your MFP Machine’s Distinctive Ring
To use Distinctive Ring:
• You must have your local telephone carrier’s Distinctive Ring service.
• Your unit must be in FAX or PC answer mode, and the PBX dial param-
eter must be set to off. Other modes—TEL, TEL/FAX, or TAD—override
Distinctive Ring.
Distinctive Ring.
• You must have a genuine OKI optional handset connected to your unit.
This feature may not work properly if you have a telephone other than a
genuine Oki optional handset connected to your MFP machine.
genuine Oki optional handset connected to your MFP machine.
12:DISTINCTIVE RING
[OFF] YES(
[OFF] YES(
) NO( )
+
+
SELECT
FUNCTION
+
+
USER
PROG.
9/SPACE
1
ABC
2
YES
1
Press the SELECT FUNCTION key.