Intex Recreation 634 Manual Do Utilizador

(110)  MODEL 634 FILTER PUMP  ENGLISH  7.5” X 10.5” PANTONE 295U  01/31/2007

ALGAE

COLORED
WATER

SUSPENDED
MATTER IN 
WATER

CHRONIC
LOW WATER
LEVEL

SEDIMENT 
ON POOL 
BOTTOM

SURFACE
DEBRIS

• Chlorine and pH levels 

need adjustment.

• Copper, iron or 

manganese in water 
being oxidized by the 
added chlorine.
Common.

• "Hard water" caused 

by pH level being too 
high.

• Chlorine content is low.
• Foreign matter in  

water.

• Rip or hole in pool 

liner or hoses. Tighten 
caps.

• Heavy use, getting in 

and out of pool.

• Pool too close to 

trees.

• Super chlorinate with shock 

treatment. Correct pH to your
pool store's recommended 
level.

• Vacuum pool bottom.
• Maintain proper chlorine  

level.

• Adjust pH to recommended 

level.

• Run filter until water is clear.
• Clean cartridge frequently.

• Correct pH. Check with pool 

dealer for water treatment.

• Check for proper chlorine 

level.

• Clean or replace your filter.

• Repair with patch kit.
• Finger tighten all caps.

• Use Intex pool vacuum to 

clean bottom of pool.

• Use Intex pool skimmer.

• Greenish water.
• Green or black 

spots on pool liner.

• Pool liner is 

slippery and/or has
a bad odor.

• Water turns blue, 

brown, or black 
when first treated 
with chlorine.

• Water is cloudy or 

milky.

• Level is lower than 

on previous day.

• Dirt or sand on 

pool floor.

• Leaves, insects 

etc.