ONKYO TX-DS777 Manual Do Utilizador

Setting the speaker configuration

• Using the on-screen display

1. Press the OSD MENU button.
2. Select “Speaker Setup” and then press the right edge of the

ENTER/Cursor button.

3. Select “Config Setup” and then press the right edge of the

ENTER/Cursor button.

4. For the TX-DS676, go to the next step.

For the TX-DS777, the display shows “All Channel For THX
Speakers.”
Select “Yes” and then press the center of the ENTER/Cursor
button. This sets all the connected speakers to THX
speakers.(The following steps are unnecessary.)
Select “No” and then press the center of the ENTER/Cursor but-
ton to go to the next step.

5. Press the upper or lower edge of the ENTER/Cursor button

to set each item and then press the right or left edge of the
button to set a parameter

Subwoofer: Set whether or not a subwoofer is connected.

Yes:

A subwoofer is connected.

No:

A subwoofer is NOT connected.

Front : Select the size of your front speakers.

Large: Large front speakers are used.
Small: Small front speakers are used.

Center : Select the size of your center speaker.

Large: A large center speaker is used.
Small: A small center speaker is used.
None:

A center speaker is NOT used.

Surround : Select the size of your surround speakers.

Large: Large surround speakers are used.
Small: Small surround speakers are used.
None:

Surround speakers are NOT used.

6. Press the center of the ENTER/Cursor button, or press the

EXIT button, to exit the setup mode.

Speaker Setup

Config Setup

Distance Setup

Level Setup

Bass Peak Setup

Config Setup

All Channel For
THX Speakers =No

Config Setup

Subwoofer

=Yes

Front

=Small

Center

=Small

Surround

=Small