Hitachi 32ld380ta Manual Do Utilizador

Página de 44
16
Audio cord (not supplied)
VGA cable (not supplied)
Monitor Television modes
MODE
Resolution
Refresh rate
VGA
640x480
60Hz
VGA
720x400
70Hz
WVGA
848x480
60Hz
SVGA
800x600
60Hz
XGA
1024x768
60Hz
WXGA
1280x720/768
60Hz
WXGA
1360x768
60Hz
Rear lower of the LCD television
To connect the LCD television to a HDMI or a DVI device
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed
digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal.
Separate analog audio cords are required.
Rear lower of the
LCD television
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A connector)
(not supplied)
To DVI output
To HDMI out
or
To PC AUDIO
IN jack
To PC IN
Connections to other equipment
NOTE:
You must choose an appropriate setting for each connection 
36
.
To connect the LCD television to a PC (Personal Computer)
Before you connect this LCD television to your PC, change the adjustment of your PC’s Resolution and
Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to
the VGA connector PC MONITOR on the back of the LCD television. Attach the connectors firmly with the
screws on the plug. In case of a Multimedia computer, connect the audio cable to the audio output of
your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the LCD television.
Switch on the computer. The LCD television can operate as the computer monitor.
Note:
If there is no video signal from the computer when the unit is in PC mode, “NO SYNC. SIGNAL” will appear
on the TV-screen for approx. 10 seconds.
HDMI, the HDMI logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
 3V90441A [E] P13-17
31/10/05, 9:21 AM
16
32LD380TA
HITACHI