Hitachi cmp307xe Manual Do Utilizador

20

● The EasyMenu shown to the right will be displayed when the SELECT button is used to select

DISPLAY and moreover DISPLAY INT is selected from the On-screen Display System EasyMenu
during RGB1/RGB2 input. If the 

key (select YES) of the SELECT button is pressed at this time,

the user adjustment values in the table below for the signal
currently being received will be deleted and the factory settings
will be restored.

■ Pressing  the 

key  (select  NO)  cancels  deletion  and  returns  the

DISPLAY menu.

INITIALIZE

？

YES

  

NO

▲▲

● Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the

table below.

■ The previously recorded items will be lost.

■ The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals

with which all the elements are the same or similar will be handled as the same signal.

■ RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because of this, when the

contents are recorded with RGB1 (or RGB2), there may be loss of adjustment during RGB2 (or RGB1) reception in the
same signal mode.

16

Sound volume
Sound balance

Treble
Bass

Mute volume
Input status automatic display
Halftone
Enlargement
Input select

VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL
AUTO FREQ.
HALFTONE
INTERPOLATION
INPUT SELECT

One set can be recorded.

During normal signal
reception.

Brightness
Contrast
Gamma correction
Input signal level
Display area

BRIGHTINES
CONTRAST
GAMMA
VIDEO LEVEL
DISPLAY AREA

One set can be recorded.

During normal signal
reception.

Horizonal position
Vertical position
Dot clock frquency
Dot clock phase

H.POSITION
V.POSITION
CLOCK
PHASE

One group can be recorded for
each signal mode.

During recording and
when the same signal
mode is detected.

H.POSITION

H.POSITION

V.POSITION

V.POSITION

CLOCK

CLOCK

PHASE

PHASE