ONKYO l-dr7 Manual Do Utilizador
118
■
Recalling the settings from Function memory
■
Restoring the PDR-155’s factory default settings
You can restore the factory default settings for DVDs.
SHIFT
FUNC.M
3
Make sure that the Setup window is not
displayed, press SHIFT, then press
FUNC.M within 10 seconds.
displayed, press SHIFT, then press
FUNC.M within 10 seconds.
Only the memorized items are displayed.
Press
to select the desired item.
Press ENTER.
/
1
2
3
STANDBY / ON
Place the PDR-155 in Standby mode.
While pressing and holding down on
the front panel, press STANDBY/ON to
turn on the unit.
the front panel, press STANDBY/ON to
turn on the unit.
All Setup items are reset to the factory default
settings.
settings.
1
2
Note
This procedure will erase all settings in Program memory (page 60), Last memory (page 65),
Condition memory (page 66), and the Setup items. Before you proceed, make sure you really
want to do this.
This procedure will erase all settings in Program memory (page 60), Last memory (page 65),
Condition memory (page 66), and the Setup items. Before you proceed, make sure you really
want to do this.
L-DR7_E.book Page 118 Tuesday, December 24, 2002 3:10 PM