ONKYO l-dr7 Manual Do Utilizador

■

Connecting a CD recorder or VCR (CDR/VIDEO IN/OUT jacks)

You can connect the audio input and output of a CD recorder or VCR to these jacks. Connect the
video output from the VCR to the TV.

To connect the L-DR7 to an Onkyo product that has an

jack, select an appropriate input

source using the [INPUT] button (page 42).

Connecting an Onkyo Separate Collection Series CD recorder

Connect the PDR-155’s CDR/VIDEO AUDIO IN jacks to the CDR-201A’s ANALOG OUTPUT
jacks.
Connect the PDR-155’s CDR/VIDEO AUDIO OUT jacks to the CDR-201A’s ANALOG INPUT
jacks.

Note that the available components may vary depending on the area.

Connecting other CD recorder or VCR models

Connect the PDR-155’s CDR/VIDEO AUDIO IN jacks to the analog audio output jacks of the CD
recorder or VCR.
Connect the PDR-155’s CDR/VIDEO AUDIO OUT jacks to the analog audio input jacks of the CD
recorder or VCR.

• Be sure to insert the cable plugs completely into the jacks. If the

connection is incomplete, noise or malfunction may occur.

• Do not bundle the audio pin cables with the power cable and/or

speaker cords. Otherwise, tonal quality may deteriorate.

• When you use an optical audio digital cable, do not bend or coil it

tightly.

• After all connections are completed, insert the power cable plug

into an appropriate AC outlet (page 40).

• The DIGITAL jack has a protective cap installed. When you use this jack,

remove the cap. When you are not using this jack, be sure to replace the
cap.

Digital recording from the PDR-155 to a CD recorder

Use an optical digital cable to connect the PDR-155’s DIGITAL OUT jack to a digital audio input
jack on the CD recorder. If you are using the CDR-201A, use its DIGITAL INPUT 1 jack.

Incomplete

Insert completely

L-DR7_E.book Page 34 Tuesday, December 24, 2002 3:10 PM