Hitachi 19VR11B Manual Do Utilizador

TIMER 

 

52

Press CH 

 (down) button repeatedly until "EVERY DAY" appears on the "DATE" 

line. Press SELECT button. 

Press CH 

 (down) button repeatedly until "EVERY" and your desired day of the 

week appears together. Press SELECT button. 

NOTE: To confirm or change the VCR plus+ code, press VCR PLUS+ button. You can 
return to step [2]. 

4 Set the tape speed 

 

Press CH 

 (up) button until your desired tape speed appears. (Example: LP) 

• You cannot use the TAPE SPEED button. 

5 Exit the VCR plus+ mode 
Press MENU or SELECT button. 
To set another program, repeat steps [1] to [5]. 

6 Set the timer 
Press POWER button to set VCR plus+ timer recording. The REC indicator lights up. 
• You must turn off the TV/VCR to activate VCR plus+ timer recording. 
If power is not turned off and you continue watching TV, "TIMER REC STANDBY" 
starts flashing on the TV screen 2 minutes before the programmed start time. 

• While setting a program; press MENU button to return to the TV mode. 

• After setting a program; 
1) Press POWER button. 
2) Press MENU button to point to "TIMER PROGRAMMING". 
3) Press CH 

 or 

 button repeatedly until your desired program number appears. 

4) Press ADD/DELETE button. 
5) Press MENU button to return to the TV mode. 
• While recording is in progress; 
1) Press POWER button. 
2) Press STOP/EJECT button on the TV/VCR. 
If you press POWER button to turn off before the end time, timer recording will continued. 
Refer to "After setting a program;" above to cancel it.