Hitachi 42pd7a10a Manual Do Utilizador

Example) HITACHI DVD 

To operate HITACHI DVD player, press and hold the 

button,

followed by the 

 button.

Press 

button to indicate the DVD LED on the remote

control.
Whilst the DVD LED is flashing, press 

and 

.

Release the 

 button whilst keeping 

button depressed.

Then, press the 

 button.

After setting the maker and type, press the POWER button
on the remote control. If the DVD does not switch on, repeat
step 1 and 2 using other maker types as listed in the chart
on

     .

•  Not all models of the listed makers can be operated using

this remote control.

When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.

A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.

When the sync signal is no
longer detected.

• A guide displays No Sync.

Signal, and Power Save (for
approx. 5 sec.)

• When the condition continues

where the sync signal cannot
be detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode. 

Recheck the personal computer
power switch status and the
connection status.

When the input signal does not
match the monitor specifications
or is in an unstable status.

A guide displays Invalid Scan
Freq.

Recheck the input signal
specifications.

RGB2
RGB

H :   48.4kHz

V :   60.1  Hz

      -- -- Min.

-- -- : -- --

! No Sync. Signal

! Invalid Scan Freq.

RGB