Honeywell IS4910 Manual Do Utilizador
5
Mounting Specifications
IS4910-00 / IS4911-00 Non-Decode Engine Dimensions
The -00 engine model includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping
screws. The mounting holes are located on the bottom of the unit with an additional keying location point for
engine alignment
screws. The mounting holes are located on the bottom of the unit with an additional keying location point for
engine alignment
.
Warning: The limited warranty (on page 31) is void if the following guidelines are not adhered to when
mounting the engine.
When securing the engine with self-tapping screws:
• Use M2.2 x 4.5 Philips pan head, type AB, Steel, zinc clear, Trivalent self-tapping screws.
• Do not exceed 1.75 +0.5 in-lb [2.02 +6 cm-kg] of torque during screw installation.
• Use a minimum mount thickness of 0.3 mm.
• Use safe ESD practices when handling and mounting the engine.
Figure 4. IS4910-00 / IS4911-00 Dimensions