omnitron-systems-technolo omnitron 8000-0 Manual Do Utilizador
The backplane data bus supports Out-of-Band Management and In-Band Management configurations.
Out-of-Band Management
Out-of-Band Management is available by directly connecting the Network Management Station (NMS)
to the UTP port on the front of the NMM. This isolates the management traffic from the rest of the
traffic in the chassis.
to the UTP port on the front of the NMM. This isolates the management traffic from the rest of the
traffic in the chassis.
Chassis
Backplane
NMM
NMM
front /
back
select
“A” Link
“B” Link
A Port
Internal
10/100
switch chip
Fiber
100 port
UTP
10/100 port
A Port
B Port
Slot 1
Slot 2
Slot 3
Internal
10/100
switch chip
Fiber
100 port
UTP
10/100 port
A Port
B Port
NMS
Disable
Enabled
Out-of-Band Management (with backplanes disabled)
In-Band Management
In-Band Management is supported by using the chassis backplane to provide connection between the NMM
and an adjacent module. The adjacent module provides access between the NMM and the NMS via the
backplane data bus. In order to provide a secure management connection, a management VLAN must be
configured (see section 3.4.3 on Management VLAN).
and an adjacent module. The adjacent module provides access between the NMM and the NMS via the
backplane data bus. In order to provide a secure management connection, a management VLAN must be
configured (see section 3.4.3 on Management VLAN).
Chassis
Backplane
NMM
NMM
front /
back
select
“A” Link
“B” Link
A Port
Internal
10/100
switch chip
Fiber
UTP
A Port
B Port
Slot 1
Slot 2
Slot 3
A Port
B Port
NMS
Customer Ethernet Switch
Internal
10/100
switch chip
Fiber
UTP
Disable
Enabled
In-Band Management (with backplanes enabled)
Page 7