Kenwood th-d72a-e Manual Do Utilizador
9 HOW TO UPDATE FIRMWARE
TH-D72A/E
77
You can view the firmware version by the procedure below. Use one of the following two ways of
verifying.
verifying.
1. Press 2 [TNC] on TH-D72A/E to display “APRSxx”.
2. Turn the power OFF.
3. Hold #[ENT] down and turn the power ON.
4. Verify the following is displayed.
2. Turn the power OFF.
3. Hold #[ENT] down and turn the power ON.
4. Verify the following is displayed.
• Number on the first row of the display: Indicates the firmware version of the transceiver.
• Number on the second row of the display: Indicates the firmware version of the Built-in TNC.
• Number on the second row of the display: Indicates the firmware version of the Built-in TNC.
Figure 9-1 Verifying Firmware Versions
1. Press 2 [TNC] on TH-D72A/E to display “APRSxx”.
2. Turn the power OFF. Connect the communication cable to the transceiver itself.
3. Turn the power of the transceiver ON.
4. Start MCP-4A and select “Transceiver Information” from the Model pulldown menu.
2. Turn the power OFF. Connect the communication cable to the transceiver itself.
3. Turn the power of the transceiver ON.
4. Start MCP-4A and select “Transceiver Information” from the Model pulldown menu.
Figure 9-2 Verifying Firmware Versions
9.3 How to Verify Firmware Version
9.3.1 Checking with the Transceiver
9.3.2 Checking with MCP-4A