Hoover silentair 4000 air purifier Manual Do Utilizador

Carefully slide a new collection sheet
(D) 

ionization line (C).

Place sheet under the four holding
tabs (E).

Reposition cover. Tighten screws.

The collection sheet change light will
now be reset.

Plug air purifier into electrical outlet
and turn ionization control to desired
setting.

Use care when handling the

ionization line. The line is very deli-
cate and could break easily if mishan-
dled.

Remove front cover as described for
replacing the collection sheet.

Carefully wipe clean the ionization
line (C), using a soft, lint-free cloth.

If desired, you may clean the collec-
tion plates (F) and the main body with
a slightly moistened cloth.

Allow air purifier to dry thoroughly. 

Slide used collection sheet (B) out.
Be careful not to snag the ionization
line (C).

Discard used sheet.

6

Grasp one end of the line and gently
stretch it to release ring (G) from hook
(H).

Remove opposite ring from hook.

To obtain approved service, call the
HOOVER SilentAir Customer Service
Center at 

, OR

Visit our website at

To replace ionization line, slip the ring
at one end over the hook. Gently
stretch the line, holding the opposite
end, to place the other ring over the
opposite hook.

Replace front cover.

Loosen cover screws (A) and remove
cover. (It is not necessary to remove
the screws completely to remove the
cover.)

The ionization line should be cleaned
periodically for the quietest perfor-
mance possible.